Products & systems

GERMAN INDUSTRIAL EQUIPMENT
Dust collection & dehumidification

PRODUCTS & SYSTEMS

Designed for your site,
starting with the right equipment.

Equipment configured for dust characteristics, available space and operating requirements.

SELECTED SOLUTIONS / 03

01ETS INDUSTRIAL DUST COLLECTION

High-performance sintered filter technology

ETS Sintered Plate Dust Collector

The ETS sintered plate filter combines a compact installation footprint with durable, cleanable filtration media for demanding industrial dust collection.

Sintered plate filter media for fine dust
Low residual dust and stable pressure drop
Side extraction installation, independent of building height
Suitable for dry, abrasive and demanding process dust

02ETS INDUSTRIAL DUST COLLECTION

Reliable filtration for continuous operation

ETS Bag Filter Dust Collector

Configured bag filter systems for industrial processes, with robust housing, accessible maintenance and complete ductwork integration.

Robust filter bags for continuous operation
Process-specific airflow and dust handling
Integrated ductwork and discharge equipment
Planning, installation and commissioning support

03ETS AIR TREATMENT

Stable humidity and clean air control

ETS Dehumidification Unit

Modular air handling and dehumidification equipment for production environments where temperature, humidity and cleanliness must remain under control.

Modular air handling configuration
Precise temperature and humidity control
Fresh air, filtration and dehumidification sections
Designed for pharmaceutical, battery and clean production areas

ETS SINTERED PLATE TECHNOLOGY

The filter element at the heart of the system.

Sintered wave filter plates combine a rigid porous body with a PTFE surface coating. The media described in our product portfolio uses PE polymer powders, formed in a single high-temperature sintering process. Filter size and area are selected around the required airflow and process conditions.

Sintered plate filter elements in warehouse storage

MATERIAL & GEOMETRY

More filtration area in a compact element.

The accordion-like wave profile provides approximately three times the surface area of a flat plate. Trapezoidal channels and a T-shaped groove help expose the dust deposit to reverse cleaning airflow, reducing dust entrapment.

Unfolded filtration area up to 9 m², depending on the element
Temperature versions: 70°C, 110°C and 160°C
Antistatic, acid-resistant and alkali-resistant options

SEALING & MAINTENANCE

Protected elements. Accessible replacement.

A resilient sheet gasket seals the top of each plate. Protective feet and corner supports absorb vibration from pulse cleaning and help prevent adjacent plates from colliding. Side extraction allows replacement without needing overhead removal clearance.

The PTFE surface coating reduces dust adhesion and penetration into the filter body. Hydrophobic media supports applications involving moist dust, subject to process suitability.

Filtration performance

Filtration precision: 1 μm
Collection efficiency: 99.99–99.999%
Typical outlet dust concentration: Below 1 mg/m³

Values describe the filter performance stated in the product portfolio. Actual outlet concentration, temperature suitability and service life depend on dust characteristics, airflow, media selection and operating conditions.

OPERATING PRINCIPLE

Continuous filtration with pulse cleaning.

Dust-laden air enters the collector. Dust stays on the outside of the plates while filtered air passes through to the clean air chamber.
As dust accumulates, the controller triggers compressed-air pulses through the elements in sequence.
Reverse airflow releases the dust into the hopper, where a discharge valve removes it. Periodic cleaning helps maintain the required airflow.

ETS DEHUMIDIFICATION

Humidity control built around your process.

Our modular, frameless air handling units combine mixing, filtration, heating, cooling, dehumidification and fan sections. Configurations include fresh air, purification and direct expansion systems, with function sections selected for the project.

Sealed construction for stable air delivery.

Insulation class T2, with T1 options
Thermal bridge class TB2, with TB1 options
Air tightness up to L1 and casing strength up to D1
Frameless construction to reduce thermal bridging
Triple gasket sealing at the rotor section door
Custom stainless steel construction without copper or zinc for lithium battery cathode applications

Final casing classes and configuration are confirmed for each selected unit.

DEHUMIDIFICATION PRINCIPLE

Separate process and regeneration air paths.

A desiccant rotor removes moisture from the process air. A separate heated regeneration airflow releases the collected moisture and carries it out of the system. Cooling and filtration sections condition the supply air for the required temperature, humidity and cleanliness.

Low casing leakage and sealed rotor access help maintain low-dew-point air delivery and reduce infiltration loads.

PRODUCT CONFIGURATION

Specifications, efficiency and suitability are subject to project conditions and confirmed equipment selection.

Designed for your site,starting with the right equipment.